The following X-Series and Q-Series (2MP with no audio) Cameras from Hanwha Vision are compatible with Genetec Stratocast with specific firmware.
Note: Q series Cameras ending with 'R1' require an update
Please note that the firmware in the table below must be installed to ensure compatibility.
All referenced firmware is available for download by clicking HERE.
X-Series and Q-series Model | Firmware |
XND-6080, XND-6080R, XND-6080V, XND-6080RV, XNV-6080, XNV-6080R | xnd6080_1.10_200414_1048 |
XND-8080R, XND-8080RV, XNV-8080R | xnd8080r_1.10_200414_1025 |
XNV-6011 | xnv6011_1.00_200414_1050 |
XND-6010, XNV-6010 | xnd6010_1.10_200414_1032 |
XNB-6000, XNO-6080R | xnb6000_1.00_200702_1800 |
XNB-6001 | xnb6001_1.00_200414_1044 |
QND-6012R1, QND-6022R1, QND-6032R1, QND-6072R1, QND-6082R1, QNO-6012R1, QNO-6022R1, QNO-6032R1, QNO-6072R1, QNO-6082R1, QNV-6012R1, QNV-6022R1, QNV-6032R1, QNV-6072R1, QNV-6082R1 |
QNO-6082R1_1.41.01b_20220404 |
The cameras and their respective firmware listed above provide direct compatibility with Genetec Stratocast
Once the firmware has been installed the Stratocast settings page can be accessed via the URL:
http://<CAMERA IP ADDRESS>/stratocast