The majority of Camera products fall into the "Type 1" column up above. Using less then 15 Watts of power
Type 2 PoE+ devices include outdoor housings such a the SHB-4300HP, X series PTZ cameras with out IR and some multi Sensor Camera products. Always check the spec sheet before starting the installation and hook up.
Type 3 and Type 4. are used in products such as the PNM-9081VQ, PNM-9320VQP and the XNP-6550RH. The H-PoE injector is normally included with the product.
PNM-9081VQ PNM-9320VQP XNP-6550RH
Procet PT-PSE109GBRO Microsemi PD-9501GR
It is important to note that constant reboot or no boot at all can be related to the device being under powered.
To verify, connect the camera separately with the correct PoE injector. In case of using a PoE switch with more PoE capabilities than needed, check the LLDP settings.
Devices that fall into the Type 3 or 4 power consumption range can reboot constantly if they are not on a properly rated injector. See information below:
PNM-9081 power requirements: Max. 33.6W (HPoE)
PNM-9320 power requirements: Max. 65W (HPoE)
XNP-6550RH power requirements: Max. 60W (HPoE)
The aforementioned devices ship with included injectors. It is NOT recommended to use another injector.
Model Part #
PNM-9320VQP & XNP-6550R
- Part Number: EP06-003425A (ADAPTOR,ELECTRIC-PT-PSE109GBRO-AH)
PNM-9081VQN
- Part Number: EP06-003018A (ADAPTER,ELECTRIC-PD-9501GR/AC)
While H-POE injectors follow some standards, in many cases they are not backwards compatible